Bosch Range (Slide-in) error codes

dE (Induction Slide-in)

Demo mode has been activated — the cooking zones will not heat

E and a number (Electric / Dual-Fuel Slide-in)

An electronics fault or error has occurred — the control beeps

e005

Communication failure between the user interface and power board

e011

Touch sensor failure on the oven control panel

E100

An electronics fault has occurred

e101

The temperature sensor on the appliance is malfunctioning

e126

The oven door lock is malfunctioning during Self Clean

e302 / E302

The power board (e302) or control panel (E302) has overheated

e310

A power supply failure or incorrect voltage was detected

E9000 / E9010 (Induction Slide-in)

The supply voltage is incorrect — outside the normal operating range

E9011 (Induction Slide-in)

The induction range is not connected properly to the power supply

ERR / toP

A cooktop zone was activated during a Self Clean cycle

F and a number (Dual-Fuel Slide-in)

An electronics fault or error has occurred on the cooktop section

F1 / F6 (Induction Slide-in)

The induction cooking zone overheated and switched off to protect the work surface

F2 / F4 / E7015 (Induction Slide-in)

The induction electronics overheated and the cooking zone switched off

F5 (Induction Slide-in)

Hot cookware is near the control panel — electronics at risk

F8 + H/h (Induction Slide-in)

The automatic time limitation was triggered — zone operated too long without interaction

U400 (Induction Slide-in)

The supply voltage is incorrect — outside the normal operating range