ErrorCodeDoctor
Daikin · Air Conditioner

Daikin Air Conditioner AH error code

Difficulty: Easy · Cost: $0–$200 · Duration: 10–15m

The AH error means your Daikin air conditioner detected a fault with the Streamer discharge dust collecting element. This can be caused by a dirty or defective dust collecting element, a contaminated insulator, or a faulty high voltage power supply unit. Clean the dust collecting element first — if the error persists contact a qualified technician.

Common causes

  • Dust collecting element is dirty and needs cleaning
  • Insulator part of the dust collector is contaminated
  • High voltage power supply unit for the Streamer has failed
  • Indoor unit PCB has a fault

How to fix it

  1. 1

    Remove and clean the Streamer dust collecting element following the instructions in your owner's manual

  2. 2

    Make sure the insulator part is clean and free of contamination

  3. 3

    Reinsert the element and restart the air conditioner

  4. 4

    If AH persists after cleaning contact a qualified technician to inspect the high voltage power supply unit

Related Daikin Air Conditioner error codes

1

A0

An external protection device connected to the indoor unit has been activated

hard
2

A1

A fault was detected in the indoor unit PCB (control board)

hard
3

A3

The drain level control system has detected an abnormality — drain may be clogged

medium
4

A5

Freeze-up protection (cooling) or high pressure control (heating) has activated — check the air filter

easy