ErrorCodeDoctor
Daikin · Air Conditioner

Daikin Air Conditioner UF error code

Difficulty: Medium · Cost: $0–$250 · Duration: 10–20m

The UF error means your Daikin air conditioner system has not been properly set up. This can be caused by improper transmission wiring between indoor-outdoor units, failure to execute the check operation, a defective indoor unit PCB, or a stop valve not being opened. Check the stop valves and wiring then run the check operation.

Common causes

  • Improper connection of transmission wiring between indoor and outdoor units
  • Check operation has not been executed
  • Defective indoor unit PCB
  • Stop valve is not opened

How to fix it

  1. 1

    Check that all refrigerant stop valves on the outdoor unit are fully open

  2. 2

    Check that the transmission wiring between indoor and outdoor units is correctly connected

  3. 3

    Run the check operation following the instructions in the installation manual

  4. 4

    If the error persists contact a qualified technician

Related Daikin Air Conditioner error codes

1

A0

An external protection device connected to the indoor unit has been activated

hard
2

A1

A fault was detected in the indoor unit PCB (control board)

hard
3

A3

The drain level control system has detected an abnormality — drain may be clogged

medium
4

A5

Freeze-up protection (cooling) or high pressure control (heating) has activated — check the air filter

easy