ErrorCodeDoctor
Whirlpool · Washing Machine (Top Load)

Whirlpool Washing Machine (Top Load) Sud error code

Difficulty: Easy · Cost: $0 · Duration: No action needed — cycle resumes automatically

The Sud code on your Whirlpool top load HE washer means too many suds were detected. The washer will automatically run a suds reduction routine — allow the cycle to continue and do not add more detergent. Always use HE high-efficiency detergent in top load HE washers. Non-HE or too much detergent creates excessive suds that can reduce cleaning performance and trigger this code.

Common causes

  • Non-HE detergent was used — regular detergent creates far too many suds in HE washers
  • Too much HE detergent was used
  • Using too much fabric softener or softener concentrate

How to fix it

  1. 1

    Allow the washer to complete the automatic suds reduction routine — do not add more detergent

  2. 2

    Always use HE high-efficiency detergent — look for the HE symbol on the detergent packaging

  3. 3

    Use only the amount recommended on the HE detergent packaging for your load size

  4. 4

    For future cycles reduce the detergent amount — especially for smaller or lightly soiled loads

Related Whirlpool Washing Machine (Top Load) error codes

1

drn

The washer is not draining properly

easy
2

F# E# / F##

A system error was detected — attempt a reset then contact service if it persists

medium
3

HC

The hot and cold inlet hoses are installed incorrectly — they are reversed

easy
4

LdL

The lid is not locking properly

easy