Samsung Washing Machine dS / d5 / FL / LO / L0 / dE / dE1 / dE2 / dC / dC1 / dL / 1dC / 1dC4 / 1dC1 error code

Difficulty: Easy · Cost: $0–$80 · Duration: 5m

These codes mean your Samsung washing machine cannot confirm the door is properly closed and locked. The washer will not run until the door is securely shut and the latch engages. This is commonly caused by clothing caught in the door, a damaged latch, or on FlexWash models a missing rubber button near the upper washer latch. If Child Lock is enabled and water is in the tub this code may appear even without running a cycle — if the door is not closed within 30 seconds the washer will drain automatically.

Common causes

Door was not pushed shut firmly enough before starting
Laundry or an object is caught between the door and the drum gasket
Door latch is worn, bent, or damaged
On FlexWash models the rubber button next to the upper washer latch is missing
Child Lock is enabled and water is in the tub with the door open

How to fix it

1

Open the door and check for any clothing or objects caught in the door seal
2

Close the door firmly and make sure it clicks shut
3

Inspect the door latch for any visible damage
4

On FlexWash models check if the rubber button next to the upper washer latch is present — replacing it will fix a 1dC4 error without needing service
5

If the latch is damaged or the code persists arrange professional service