ErrorCodeDoctor
LG · Washing Machine (Wash Tower)

LG Washing Machine (Wash Tower) OE error code

Difficulty: Easy · Cost: $0–$100 · Duration: 15–20m

The OE error on your LG WashTower washer means water is draining very slowly or not at all. The drain pump filter is most commonly clogged. The WashTower requires at least 10 cm clearance at the rear and 2 cm on both sides for proper drain hose positioning. If the washer is installed too close to a wall the drain hose may kink.

Common causes

  • Drain pump filter is clogged with lint or debris
  • Drain hose is kinked because the unit is installed too close to a wall
  • Drain hose is frozen in cold weather

How to fix it

  1. 1

    Clean the drain pump filter: prepare a container for water, open the access cover on the lower front, take out the residual water drain hose and drain it, turn the cap of the pump, remove and clean the filter, reassemble all components

  2. 2

    Check the drain hose and unfold any bends — ensure at least 10 cm clearance at the rear and 2 cm on both sides

  3. 3

    Remove the drain hose from the drain, power on and perform a Spin cycle — if water flows out freely the drain hole is clogged, if not the drain pump needs inspection

  4. 4

    To thaw a frozen drain hose pour warm water (50–60°C) into the drum, close the door and wait 1–2 hours for the drain pump to thaw

Related LG Washing Machine (Wash Tower) error codes

1

LE / CE

The washer drum is not rotating — motor issue or foreign object trapped (LE) or motor control component damaged (CE)

easy
2

IE

The washer is not filling with water — inlet error

easy
3

UE

The laundry load is unevenly distributed — unbalance error

easy
4

dE1 / dE2 / dE4

The washer door is not properly closed or locked

easy