Samsung Range bAd LinE error code

Difficulty: Medium · Cost: $0–$150 · Duration: 10–15m

The bAd LinE error means your Samsung range detected that the power connection is not properly connected. This typically appears after installation and indicates the power cord or terminal block connection at the back of the range needs to be checked and correctly seated. Refer to the installation manual or contact a professional installer to verify the connection.

Common causes

Power cord connection at the back of the range is not fully seated
Power cord was installed incorrectly during setup
Terminal block wiring connection is loose or incorrect

How to fix it

1

Turn off the circuit breaker before touching any power connections
2

Reconnect the power connection at the back of the range and make sure it is firmly and correctly connected
3

Refer to the installation manual for the correct power cord installation steps
4

If you are not comfortable working with electrical connections contact a professional installer or electrician