ErrorCodeDoctor
Samsung · Range

Samsung Range C-F0 error code

Difficulty: Medium · Cost: $0–$200 · Duration: 5m

The C-F0 error means your Samsung range detected a communication failure between internal electronic components. On certain induction range models (NSI6D models ending in 9100, 9300, or 9500) a software update via SmartThings resolves this without needing service. For all other models a power reset is the first step. If the error returns after resetting arrange professional service.

Common causes

  • Communication fault between internal electronic components
  • On specific NSI6D induction models a known software issue causes this error

How to fix it

  1. 1

    Turn the range off and back on using the Power button to reset it

  2. 2

    If C-F0 disappears after reset but then returns on NSI6D models ending in 9100 9300 or 9500 connect the range to SmartThings and install the available software update

  3. 3

    To trigger the update go to Settings on the range press and hold Light for 3 seconds then navigate to Restart — this prompts an update within 30 minutes after connecting to SmartThings

  4. 4

    The display will show Upgrading during the update and Completed when finished

  5. 5

    Verify the firmware version is DE92-04769A_24052400 or later in the SmartThings app

  6. 6

    If a software update is not available for your model or C-F0 persists after updating arrange professional service

Related Samsung Range error codes

1

Underlined u

The cookware on the induction element is unsuitable — Pan Detection Error

easy
2

Cooktop in use

A cooktop burner or element is still on — Self Clean cannot start

easy
3

-dE- / -dC-

The oven partition is not installed correctly

easy
4

door

The oven door is not detected as closed

medium