LG Air Conditioner error codes
Select an LG air conditioner error code to see what it means, common causes, and how to fix it.
Error Codes
CH01
A fault was detected in the indoor pipe temperature sensor
CH02
A short or open circuit was detected in the indoor pipe sensor
CH03
No refrigerant detected — the unit is out of refrigerant gas
CH04
The indoor unit is not draining condensate water properly
CH05
Communication between the indoor and outdoor units has been lost
CH07
Two connected units are set to conflicting operating modes
CH10
The indoor unit fan has detected a fault and cannot operate properly
CH237
The outdoor unit is not receiving power and cannot communicate with the indoor unit
CH38
The air conditioner is low on refrigerant gas
CH54
A reverse phase or abnormal power supply was detected
CH61
The outdoor unit overheated during cooling or the indoor unit overheated during heating
CH66
A fault was detected in the communication line or piping connection between the indoor and outdoor units
CH67
The outdoor unit fan has detected a fault and cannot operate properly
CH90
A fault was detected during the test run phase to protect the unit from damage
CH93
Communication between the indoor and outdoor units is unstable or has failed
E4
The unit has entered defrost mode to melt ice on the evaporator
P2
The drain pan inside the unit is full and needs to be emptied